Think about the comfort of effortlessly sliding your Ford seat backwards and forwards to accommodate totally different drivers or cargo wants. Putting in an additional Ford seat L observe can remodel your car right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, guaranteeing a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to reinforce your driving expertise with this useful improve. Embark on this journey to unlock the complete potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You will want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L observe. Together with your arsenal of assets prepared, you possibly can proceed with confidence. Step one entails eradicating the prevailing seat out of your car. Rigorously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you will have clear entry to the realm the place the additional L observe might be put in.
Now comes the exact set up of the additional Ford seat L observe. Place the L observe onto the seat base and align it precisely with the prevailing observe. Safe the L observe firmly utilizing the supplied self-tapping screws. Make sure the screws are adequately tightened to forestall any motion or rattling throughout use. As soon as the L observe is securely fixed, fastidiously reinstall the seat into your car. Reconnect the wiring harness and bolt the seat again into its authentic place. With these steps meticulously adopted, you’ve got efficiently put in the additional Ford seat L observe, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Present L Observe
To start, find the prevailing L observe in your Ford car. That is the observe that the seat rails slide backwards and forwards on. It’s sometimes positioned underneath the seat, and it might be lined by a plastic or steel trim panel. In case you are having hassle discovering the L observe, seek the advice of your car’s proprietor’s handbook or seek for diagrams on-line.
After getting positioned the prevailing L observe, you have to to find out how a lot further observe you might want to set up. This may rely upon the kind of seat you might be putting in and the quantity of adjustment you need. Typically talking, you have to so as to add at the very least 12 inches of observe to every aspect of the seat.
Here’s a desk of measurements and solutions for the way a lot further L observe you might want:
| Seat Kind | Further L Observe Wanted |
|---|---|
| Commonplace bench seat | 12 inches per aspect |
| Bucket seat | 18 inches per aspect |
| Racing seat | 24 inches per aspect |
After getting decided how a lot further observe you want, you should purchase the suitable observe on-line or out of your native auto components retailer.Assembling the Further L Observe
Step 1: Collect Supplies
You will have the next supplies:
- Further L observe
- L observe mounting bolts
- Socket wrench
Step 2: Put together the L Observe
Measure and mark the areas for the mounting bolts on the L observe. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Make sure that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Measurement |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Observe to the Car
Align the L observe with the mounting holes on the car. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Make sure that the L observe is securely hooked up.
Aligning and Attaching the L Observe
As soon as the L observe is minimize to the proper size, it is very important align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L observe on the ground alongside the specified alignment.
- Examine for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the car’s body.
- Mark the situation of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked areas utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L observe with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, guaranteeing they’re securely fixed.
| Materials | Amount | Size |
|---|---|---|
| L Observe | 2 | As per car necessities |
| Mounting Bolts | 8-10 (per L observe) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat might be securely fixed to the L-track. To tighten the bolts, you have to a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this will harm the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Observe
Reinforcing the L observe is an important step to make sure the soundness and sturdiness of your aftermarket seat set up. Here is an in depth information that will help you reinforce the L observe:
Supplies Required
| Element | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the prevailing weld nuts or mounting factors on the car’s flooring the place the unique seat observe was hooked up. These factors will function the reinforcement factors.
- Measure and Reduce Flat Bars: Reduce two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the car’s flooring.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the prevailing L observe. Make sure that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Observe: Place the L observe over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the beneficial torque specs.
- Further Issues: In sure circumstances, resembling for heavy-duty purposes or for putting in aftermarket seats with a big weight capability, you might want so as to add further help by welding the flat bars to the car’s flooring. Seek the advice of with a professional automotive skilled for correct welding directions.
Putting in the Seat on the L Observe
As soon as the L observe is put in, you possibly can start putting in the seat. To do that, you have to to:
- Align the seat with the L observe. Be sure that the seat is going through the proper course and that the entrance of the seat is aligned with the entrance of the L observe.
- Elevate the seat onto the L observe. Rigorously raise the seat onto the L observe and be sure that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to be sure that it strikes easily alongside the L observe.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L observe.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Alter the Seat Place
As soon as the seat is put in, you possibly can alter the seat place to your liking. To do that, you should utilize the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This consists of putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is usually included with the seat, however you might must buy it individually if you’re putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you have to to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you have to to:
Adjusting the Seat Place
To regulate the seat place, observe these steps:
- Find the seat adjustment levers. These are normally positioned on the aspect of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Elevate or decrease the seat cushion. To do that, pull up on the lever positioned on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever positioned on the rear of the seatback.
- Alter the lumbar help. To do that, flip the knob positioned on the aspect of the seat.
- Alter the headrest. To do that, pull up on the lever positioned on the high of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Function | Alter |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Elevate or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Alter lumbar help | Flip knob on aspect of seat |
| Alter headrest | Pull up on lever at high of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe footwear to attenuate the danger of damage.
- Disconnect the Battery: Disconnect the unfavourable terminal of your battery to forestall electrical hazards throughout the set up.
- Park on a Stage Floor: Park your car on a flat, steady floor to make sure it stays stationary all through the method.
- Help the Seat: Make the most of a jack stand or different appropriate help to forestall the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every job, together with a socket wrench, torque wrench, and drill.
- Observe Directions Rigorously: Seek advice from the producer’s directions or a good on-line information to make sure correct set up.
- Examine Tightness Repeatedly: As soon as put in, periodically examine the tightness of all bolts and screws to keep up security.
- Safe L Observe: Make sure the L observe is securely hooked up to the ground or brackets utilizing the desired bolts and torque settings.
- Reattach Seat: Rigorously reattach the seat to the L observe, guaranteeing it slides easily and locks into place securely.
9. Examine Alignment and Tighten Bolts
Examine the alignment of the newly put in L observe to make sure it’s parallel to the prevailing observe. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the desired torque values utilizing a torque wrench. This step ensures the L observe stays firmly in place and the seat might be adjusted easily and safely.
Troubleshooting Widespread Points
In case you encounter any points whereas putting in the additional Ford seat L observe, examine the next troubleshooting steps:
1. Observe Alignment
Make sure that the brand new L observe is correctly aligned with the prevailing one. Misalignment can stop the seats from sliding easily.
2. Bolt Tightening
Confirm that each one bolts are securely tightened. Free bolts may cause rattling and instability.
3. Particles Elimination
Examine the observe for any particles or grime. Clear it completely to forestall interference with seat motion.
4. Seat Compatibility
Verify that the seats you propose to make use of are suitable with the L observe system. Incompatible seats could not match appropriately.
5. Rail Extension
If you might want to prolong the observe size, use suitable rail extension brackets. Improper extension can weaken the observe energy.
6. Lubrication
Apply a skinny layer of lubricant to the observe to scale back friction and enhance seat sliding.
7. Wiring Obstructions
Make sure that there are not any wiring harnesses or cables obstructing the observe path. Keep away from harm throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting strategies to keep away from damage.
9. Software Necessities
Have all obligatory instruments obtainable, together with a socket wrench, drill, and applicable fasteners.
10. Search Skilled Help
In case you encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Further Ford Seat L Observe
To put in additional Ford seat L observe, you have to the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L observe
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
After getting gathered all the obligatory instruments and supplies, you possibly can observe these steps to put in the brand new seat L observe:
1. Take away the previous seat L observe. To do that, you have to to take away the 4 bolts that safe the seat L observe to the seat body. As soon as the bolts are eliminated, you possibly can raise the seat L observe off of the seat body.
2. Clear the seat body. As soon as the previous seat L observe is eliminated, you have to to scrub the seat body. This may assist to make sure that the brand new seat L observe is put in correctly.
3. Set up the brand new seat L observe. To do that, you have to to put the brand new seat L observe on the seat body. Be sure that the brand new seat L observe is aligned correctly.
4. Safe the brand new seat L observe. As soon as the brand new seat L observe is aligned correctly, you have to to safe it to the seat body. To do that, you have to to insert the 4 bolts into the holes within the seat L observe and tighten them till they’re cosy.
5. Take a look at the brand new seat L observe. As soon as the brand new seat L observe is put in, you have to to check it to be sure that it’s working correctly. To do that, you have to to sit down within the seat and transfer the seat backwards and forwards. The seat ought to transfer easily and simply.
Folks Additionally Ask
What’s a seat L observe?
A seat L observe is a steel observe that’s mounted to the seat body. The seat L observe permits the seat to maneuver backwards and forwards.
How do I do know if I would like to switch my seat L observe?
In case your seat will not be transferring easily or simply, it might be obligatory to switch the seat L observe.
How a lot does it price to switch a seat L observe?
The associated fee to switch a seat L observe will range relying on the make and mannequin of your car. Nevertheless, you possibly can anticipate to pay between $100 and $300 for the components and labor.
