If you’re wanting so as to add an additional pipe to your out of doors faucet, there are some things you’ll need to do. First, you’ll need to collect the required supplies. These embrace a brand new pipe, a pipe cutter, a pipe wrench, and a few Teflon tape. After you have your entire supplies, you may start the method of including the brand new pipe.
Step one is to chop the outdated pipe. To do that, you’ll need to make use of the pipe cutter. Be certain to chop the pipe squarely in order that the brand new pipe will match correctly. After you have reduce the outdated pipe, you may take away it from the tap. Subsequent, you’ll need to use Teflon tape to the threads of the brand new pipe. This may assist to create a watertight seal. After you have utilized the Teflon tape, you may screw the brand new pipe into the tap.
Lastly, you’ll need to tighten the pipe with the pipe wrench. Be certain to tighten the pipe securely, however don’t overtighten it. After you have tightened the pipe, you may activate the water and examine for leaks. If there are not any leaks, then you’ve gotten efficiently added a brand new pipe to your out of doors faucet.
Instruments and Supplies Required
To efficiently add one other pipe to your out of doors faucet, you may want the next instruments and supplies:
Pipe Wrench
Two pipe wrenches are required, one to carry the tap in place and the opposite to tighten the brand new pipe. Select pipe wrenches which might be appropriately sized for the diameter of the pipes you may be working with. Adjustable pipe wrenches are a great possibility for versatility.
Hack Noticed
A hack noticed is used to chop the prevailing pipe to create a connection level for the brand new pipe. Choose a hack noticed with a pointy blade designed for chopping metallic. Guarantee you’ve gotten further blades available if vital.
Taps
A alternative faucet is required for the brand new pipe. Select a faucet that’s suitable along with your plumbing system and meets your required circulation charge and design preferences.
PEX Pipe
PEX (polyethylene) pipe is a versatile and sturdy possibility for connecting the brand new faucet to the prevailing pipe. Decide the suitable diameter and size of PEX pipe wanted to your software.
PEX Pipe Connectors
PEX pipe connectors are used to hitch the PEX pipe to the tap and the prevailing pipe. Choose connectors which might be suitable with the PEX pipe diameter and the prevailing plumbing fixtures.
Teflon Tape
Teflon tape is a sealant used to stop leaks at pipe connections. Wrap Teflon tape across the threads of the connectors earlier than tightening to make sure a watertight seal.
Different Supplies
Along with the important instruments and supplies listed above, you may additionally require the next:
- Security glasses
- Work gloves
- Plumber’s putty (non-compulsory)
| Instrument or Materials | Dimension or Sort | Amount |
|—|—|—|
| Pipe Wrenches | Adjustable | 2 |
| Hack Noticed | Metallic-cutting blade | 1 |
| Taps | Suitable with plumbing | 1 |
| PEX Pipe | Diameter and size required | 1 |
| PEX Pipe Connectors| Suitable with PEX pipe and fixtures | 3 |
| Teflon Tape | N/A | 1 |
| Security Glasses | N/A | 1 |
| Work Gloves | N/A | 1 |
Security Precautions
1. Flip off the water provide: Earlier than starting any work, it’s crucial to close off the water provide to the tap. This may be finished by finding the principle water shut-off valve, sometimes discovered close to the road or within the basement of your house.
2. Put on protecting gear: When working with plumbing, you will need to shield your self from potential hazards reminiscent of water, chemical substances, and sharp objects. Put on gloves, security glasses, and applicable clothes to defend your self.
3. Examine the prevailing pipe: Earlier than putting in the brand new pipe, fastidiously look at the situation of the prevailing pipe. Verify for leaks, cracks, or different injury that would point out potential issues. If any injury is current, it is strongly recommended to seek the advice of with a licensed plumber for restore or alternative.
4. Collect vital supplies: Earlier than commencing the duty, guarantee you’ve gotten all the required supplies, together with the brand new pipe, fittings, wrenches, pipe sealer, and thread tape.
5. Plan the pipe route: Decide probably the most environment friendly and logical route for the brand new pipe. Take into account elements reminiscent of the placement of the water supply, the tap, and any obstacles in the way in which.
Selecting the Proper Pipe
Step one in including one other pipe to your out of doors faucet is to decide on the suitable pipe. There are a lot of several types of pipes accessible, so it is essential to pick out one that’s suitable along with your current plumbing system and meets your wants.
Materials
Pipes will be constituted of a wide range of supplies, together with copper, PVC, and PEX. Copper is probably the most sturdy and costly possibility, whereas PVC is probably the most inexpensive and best to work with. PEX is a more recent kind of pipe that’s versatile and straightforward to put in, however it’s dearer than PVC.
Dimension
The scale of the pipe you want will rely upon the circulation charge of your faucet. A 1/2-inch pipe is enough for many out of doors taps, however you could want a 3/4-inch pipe you probably have a high-flow faucet.
Size
The size of the pipe you want will rely upon the space between your faucet and the water supply. Remember to measure the space fastidiously earlier than you buy the pipe.
| Materials | Execs | Cons |
|---|---|---|
| Copper | Sturdy, corrosion-resistant | Costly, troublesome to work with |
| PVC | Inexpensive, straightforward to work with | Not as sturdy as copper, can change into brittle in chilly climate |
| PEX | Versatile, straightforward to put in | Dearer than PVC, will be broken by daylight |
Measuring and Marking the Pipe
Precisely measuring and marking the pipe is essential for a profitable set up. Observe these steps:
1. Decide the Pipe Size
Measure the space between the prevailing pipe and the specified location of the brand new pipe. Add just a few further inches to permit for fittings and connections.
2. Select the Pipe Materials and Dimension
Choose the suitable pipe materials primarily based in your particular wants, reminiscent of PVC, CPVC, or metallic. The pipe measurement ought to match the prevailing pipe.
3. Lower the Pipe
Use a pipe cutter or hacksaw to chop the pipe to the specified size. Guarantee a clear and perpendicular reduce for a safe connection.
4. Marking the Pipe
Mark the pipe on the following places:
- Finish Markings: Clearly mark each ends of the pipe to point the supposed path of circulation (e.g., “Water In” and “Water Out”).
- Connection Factors: Measure and mark the precise places the place fittings or different connections can be made. Use a stage or plumb bob to make sure correct alignment.
- Notches for Clamps: If utilizing clamps to safe the pipe, mark the areas the place notches can be reduce to accommodate the clamps. Be certain the notches are aligned and symmetrical.
Chopping and Getting ready the Pipe
Step 1: Collect Instruments and Supplies
Earlier than you begin, collect the required instruments and supplies, together with a hacksaw, measuring tape, primer, and adhesive.
Step 2: Measure and Mark the Pipe
Measure the specified size of the brand new pipe part and use a marker to point the chopping level.
Step 3: Lower the Pipe
Safe the pipe in a vise and thoroughly reduce it utilizing a hacksaw. Make a clear and perpendicular reduce to make sure a good match.
Step 4: Deburr the Pipe Ends
Use a file or sandpaper to take away any sharp edges or burrs from the reduce ends of the pipe. This may guarantee a easy connection.
Step 5: Apply Primer and Adhesive
Apply a skinny layer of primer to each the within and outdoors of the pipe ends to enhance adhesion. Then, apply a beneficiant quantity of adhesive to 1 finish of the pipe.
Step 6: Be a part of the Pipe Sections
Rapidly insert the unprimed finish of the brand new pipe part into the primed finish of the prevailing pipe. Rotate and press the sections collectively till they’re totally related.
Step 7: Maintain for Curing Time
Keep strain on the joined sections for the beneficial curing time specified by the adhesive producer.
Step 8: Take away Extra Adhesive
As soon as the adhesive has cured, use a moist material to wipe away any extra adhesive that has squeezed out across the joint.
Step 9: Confirm Connection
Run water by way of the pipe to confirm that the connection is leak-free. If vital, apply further sealant to any leaks.
Becoming a member of the New Pipe
Becoming a member of the brand new pipe to the prevailing system requires cautious preparation and a spotlight to element. Observe these steps to make sure a safe and leak-proof connection:
1. Lower the Pipes
Mark and reduce the prevailing pipe and the brand new pipe to the specified lengths utilizing a pipe cutter. Make sure the cuts are clear and perpendicular to the pipe.
2. Take away Burrs and Debur
Take away any burrs or particles from the reduce ends of the pipes utilizing a deburring device or sandpaper. This may assist stop leaks and guarantee a easy connection.
3. Apply Primer and Cement
Apply a primer to the within of the socket finish of the becoming and the skin of the pipe finish. Permit the primer to dry in response to the producer’s directions.
4. Apply Cement
After the primer has dried, apply a liberal quantity of cement to each the within of the socket finish of the becoming and the skin of the pipe finish.
5. Insert the Pipe into the Becoming
Instantly insert the pipe into the becoming, twisting it barely as you push it in. Make sure the pipe is totally seated within the becoming.
6. Tighten the Joint
Use a wrench or different appropriate device to tighten the joint in response to the producer’s specs. The next desk offers tips for tightening several types of pipe joints:
| Pipe Materials | Tightening Torque (ft-lbs) |
|---|---|
| PVC | 10-15 |
| CPVC | 15-20 |
| ABS | 10-15 |
After tightening, examine the joint for leaks. If a leak is detected, disassemble the joint and repeat the steps above.
Connecting the Pipe to the Out of doors Faucet
To attach the pipe to the out of doors faucet, comply with these seven detailed steps:
1. Flip Off and Disconnect the Water Predominant
Find and switch off the water primary to stop water strain from damaging the pipe throughout set up.
2. Take away the Present Aerator
Unscrew the aerator hooked up to the top of the out of doors faucet utilizing a pair of pliers or an adjustable wrench.
3. Set up the Adapter
Screw the brass hose bib adapter onto the tap threads. Tighten it securely utilizing a wrench.
4. Connect the Backyard Hose Elbow
Join a 90-degree backyard hose elbow to the brass adapter. Hand-tighten it initially and use pliers to additional safe it.
5. Prolong the Pipe Size (Non-compulsory)
If desired, lengthen the size of the pipe utilizing further PVC pipes and connectors. Guarantee all connections are correctly sealed with PVC cement.
6. Seal the Joint with Teflon Tape
Wrap Teflon tape across the threads of the backyard hose elbow that can connect with the pipe. This may create a watertight seal.
7. Join the Pipe to the Elbow
Screw the pipe onto the Teflon-wrapped threads of the backyard hose elbow. Tighten it by hand initially after which use a wrench to make sure it’s safe. Take into account the next further suggestions for attaching the pipe:
– Make sure the pipe is straight and parallel to the tap.
– Keep away from overtightening the connection, as this could injury the threads.
– If the pipe is made of soppy materials (e.g., PEX), use a rubber washer for a greater seal.
– Verify for leaks by turning the water provide again on and inspecting the connections.
Testing for Leaks
After your new pipe is put in, it’s important to check for leaks to make sure the repairs had been profitable and there are not any potential water injury dangers. Listed below are the steps concerned in testing for leaks:
- Flip the water again on on the primary shutoff valve.
- Verify all of the joints and connections the place the brand new pipe was put in, on the lookout for any indicators of water seepage or leaks.
- Run water by way of the taps and fixtures related to the brand new pipe to examine for correct water circulation and any leaks.
- Examine the world across the pipe for any puddles or dampness that would point out a leak.
- Use a flashlight to look at the pipe and connections in low-light circumstances to reinforce visibility of any water leaks.
- Hear for any uncommon noises, reminiscent of dripping or whistling sounds, which could possibly be an indication of a leak.
- Place a small quantity of bathroom paper or tissue across the joints and connections. If the tissue turns into moist, it signifies a doable leak.
- Use knowledgeable leak detector device to pinpoint the precise location of a leak. These instruments emit a high-pitched sound after they detect the presence of water.
In the event you uncover any leaks through the testing course of, it’s advisable to handle them promptly to stop expensive water injury. You may both try and tighten the connections your self or contact a licensed plumber for help.
Putting in a Pipe Insulation Cowl
9. **Pipe Insulation Cowl:**
To additional improve insulation and shield the pipes from exterior elements, think about putting in a pipe insulation cowl. This cowl acts as an extra layer of safety and helps keep the specified temperature throughout the pipes.
Listed below are the steps concerned in putting in a pipe insulation cowl:
| Step | Description |
|---|---|
| 1 | Measure the size of the pipe to find out the suitable measurement of insulation cowl. |
| 2 | Slide the insulation cowl over the pipe, guaranteeing it matches snugly. |
| 3 | Use duct tape or different appropriate adhesive to safe the insulation cowl in place. |
| 4 | Overlap the sides of the insulation cowl for added safety and to stop moisture penetration. |
| 5 | Use a pointy knife or utility blade to trim any extra insulation cowl from the ends. |
By following these steps, you may successfully set up a pipe insulation cowl to guard your out of doors pipes from freezing and different antagonistic climate circumstances.
Finalizing the Set up
10. Apply Joint Compound and Mesh Tape: Combine joint compound in response to the producer’s directions. Apply a skinny layer of joint compound over the mesh tape, protecting it utterly. Permit the primary layer to dry, then apply a second layer to easy the floor.
11. Sand the Joint: As soon as the joint compound has dried, sand it evenly with fine-grit sandpaper. This may take away any imperfections and create a easy, even floor.
12. Prime the Joint: Apply a coat of primer over the joint to seal it and put together it for portray.
13. Paint the Joint: Paint the joint and surrounding space with a colour that matches the prevailing exterior. Permit the paint to dry utterly.
14. Caulk the Joints: Apply a bead of caulk across the edges of the pipe and the wall. This may seal any gaps and forestall water from leaking into the joint.
15. Activate the Water: Slowly activate the water provide and examine for any leaks. Tighten any connections or joints as wanted.
16. Examine Often: Often examine the set up to make sure that it’s functioning correctly and there are not any leaks. Any points ought to be addressed promptly.
| Instruments & Supplies |
|---|
| Joint Compound |
| Mesh Tape |
| Sandpaper |
| Primer |
| Paint |
| Caulk |
The right way to Add One other Pipe to an Out of doors Faucet
Including an extra pipe to your out of doors faucet is a comparatively straightforward challenge that may be accomplished in just some quick steps. By following these easy directions, you may simply improve the variety of spigots accessible for out of doors use, making it extra handy to water your garden, backyard, or wash your automobile.
Supplies Required:
- New pipe (1/2-inch copper or PEX)
- Compression fittings (two)
- Pipe cutter
- Wrenches (two)
- Teflon tape
Steps:
1. Flip off the water provide to the out of doors faucet. Open the tap to launch any residual water.
2. Use the pipe cutter to chop the prevailing pipe about 6 inches away from the tap. Deburr the reduce ends of the pipe with a file or sandpaper.
3. Connect one finish of a compression becoming to the reduce finish of the prevailing pipe. Tighten the becoming utilizing wrenches.
4. Connect the opposite finish of the compression becoming to 1 finish of the brand new pipe.
5. Wrap Teflon tape across the threads of the opposite finish of the brand new pipe.
6. Screw the brand new pipe into the out of doors faucet.
7. Activate the water provide and examine for leaks. Tighten any fittings which might be leaking.
Individuals Additionally Ask
How a lot does it value so as to add one other pipe to an outside faucet?
The price of including one other pipe to an outside faucet will range relying on the supplies used and the complexity of the challenge. Nonetheless, it’s sometimes a comparatively cheap challenge that may be accomplished for lower than $50.
Can I add a number of pipes to an outside faucet?
Sure, you may add a number of pipes to an outside faucet. Nonetheless, you must be certain that the water strain is enough to help the extra spigots. If the water strain is simply too low, you could want to put in a strain booster.
What kind of pipe is finest for including to an outside faucet?
The most effective kind of pipe for including to an outside faucet is copper or PEX. Copper is a sturdy materials that’s proof against corrosion and freezing. PEX is a versatile materials that’s straightforward to put in and can be proof against corrosion and freezing.
