Measuring a swivel plate for stools is important to make sure a safe and comfy match. Whether or not you are changing an present swivel plate or putting in a brand new one, correct measurements are essential for optimum efficiency. On this complete information, we’ll stroll you thru the step-by-step strategy of measuring a swivel plate for stools. We’ll cowl the whole lot from figuring out the right dimension to measuring the bolt gap spacing and peak. By following our detailed directions, you can be sure that your swivel plate matches completely and gives the steadiness and luxury you want.
Firstly, you will want to find out the right dimension of the swivel plate on your stool. That is sometimes measured in inches and the dimensions will range relying on the stool’s base and the type of the swivel plate. To measure the dimensions, use a tape measure to find out the diameter of the bottom the place the swivel plate can be mounted. Upon getting the diameter, you’ll be able to select a swivel plate that’s the identical dimension or barely smaller. It is essential to make sure that the swivel plate is just not too massive, as this could trigger it to overhang the sting of the bottom and create an unstable or uncomfortable sitting place.
Subsequent, you will have to measure the bolt gap spacing. This refers back to the distance between the mounting holes on the swivel plate. To measure the bolt gap spacing, use a tape measure to find out the center-to-center distance between the holes. It is essential to measure this precisely because the bolt gap spacing should match the outlet spacing on the stool’s base. If the bolt gap spacing is wrong, the swivel plate won’t be able to be mounted securely. Moreover, you will have to measure the peak of the swivel plate. That is sometimes measured from the highest of the mounting plate to the highest of the swivel plate. The peak of the swivel plate will decide the peak of the stool seat. Subsequently, it is essential to pick out a swivel plate with a peak that’s acceptable for the supposed use of the stool.
Figuring out the Swivel Plate Diameter
Measuring the diameter of a swivel plate for stools is essential for making certain an ideal match and secure seating. This is a step-by-step information that can assist you decide the right diameter:
1. Measure the Base of the Stool:
Utilizing a measuring tape or a ruler, measure the diameter of the bottom of the stool at its widest level. This measurement provides you with the outer diameter of the swivel plate.
2. Permit for Clearance:
To make sure the swivel plate matches snugly on the stool base, subtract 1/8 to 1/4 inch from the outer diameter measurement. This may present sufficient clearance for the plate to slip onto the bottom with out binding.
3. Decide the Swivel Plate Diameter:
Upon getting the inside diameter measurement, add 1/4 to 1/2 inch to account for the thickness of the swivel plate. This provides you with the right diameter of the swivel plate you want.
Desk: Swivel Plate Diameter Measurement Information
| Stool Base Diameter | Outer Swivel Plate Diameter | Interior Swivel Plate Diameter | Swivel Plate Thickness |
|---|---|---|---|
| 15 inches | 14-14.5 inches | 13.75-14.25 inches | 0.25-0.5 inches |
| 17 inches | 16-16.5 inches | 15.75-16.25 inches | 0.25-0.5 inches |
| 19 inches | 18-18.5 inches | 17.75-18.25 inches | 0.25-0.5 inches |
How To Measure A Swivel Plate For Stools
To measure a swivel plate for stools, you will have a measuring tape and a pen or pencil. First, measure the diameter of the stool’s base. That is the gap throughout the bottom from one facet to the opposite. Subsequent, measure the peak of the stool from the ground to the highest of the seat. Lastly, measure the gap from the middle of the stool’s base to the middle of the seat. That is the radius of the swivel plate.
Upon getting these measurements, you should utilize them to calculate the dimensions of the swivel plate you want. The diameter of the swivel plate must be equal to the diameter of the stool’s base. The peak of the swivel plate must be equal to the peak of the stool from the ground to the highest of the seat. The radius of the swivel plate must be equal to the gap from the middle of the stool’s base to the middle of the seat.
Folks Additionally Ask
How do I do know what dimension swivel plate I want?
To find out the dimensions of the swivel plate you want, measure the diameter of the stool’s base, the peak of the stool from the ground to the highest of the seat, and the gap from the middle of the stool’s base to the middle of the seat.
What’s the distinction between a swivel plate and a base plate?
A swivel plate is a round plate that enables a stool to swivel. A base plate is an oblong plate that helps the stool’s legs.
Can I change the swivel plate on my stool?
Sure, you’ll be able to change the swivel plate in your stool. Nevertheless, you will need to just remember to buy a swivel plate that’s the right dimension on your stool.
